Digital Paint Discussion Board
Paintball 2: The Game => Server Discussion => Topic started by: Boozie on November 28, 2007, 07:08:26 PM
-
I ran the TroubleShooter and here is my results
DP Resource Public Server Troubleshooter
Specified server information: 72.147.140.170:27910
RCON password provided? no
Run at Thu, 29 Nov 2007 00:02:11 +0000
TEST PROCESS
===================
> Checking if 72.147.140.170:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> No entries found on the server list
RECOMMENDATIONS
===================
* Your server may not even be running; try connecting to it on this computer: run /connect 127.0.0.1:27910 in console
* Your server's port may not be forwarded; make sure you forward your ports for UDP port 27910 (and make sure it's set to the right computer address)
* Your server's port may be firewalled; make sure you allow port 27910 through your firewall
Forwarded the port and firewall. Server was running when I ran test also and can connect using 127.0.0.1:27910.
But its not on the list and I cant connect through normal IP. Whats Up?
Heart beat is acknowledged and is in config.
-
Go to www.ipchicken.com and give us your public ip address.
Give us a screen shot of your port forwarding configuration of your router.
Make sure that your firewall is either disabled or that ports 27900 through 27930 have been allowed through.
-
65.80.53.247
-
Is your IP address 192.168.2.1? That's usually the address of the router.
-
The IP is right because one day I did it once.
-
Are you SURE, though? That really doesn't sound right.
Try running ipconfig from the console and use the IP address that gives you.
-
Every time I try and run something from "run" it will bring up the window and close it, so I can't see anything.
-
1. You need to allow 27900 udp to pass through your router
2. Goto Start > Run > type in the word cmd then hit enter
3. in the command line type ipconfig and tell us what it says.
C:\Documents and Settings\Chris.DC7D0C6F6FA4424>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : mshome.net
[b]IP Address. . . . . . . . . . . . : 192.168.0.230[/b] <-- this is your ip address on your lan
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
C:\Documents and Settings\Chris.DC7D0C6F6FA4424>
-
192.168.2.2
Changed it in my forwards.
-
Now run the test again and let us know what it says.
-
Same thing, I used the IP that was given to me from IPChicken.
DP Resource Public Server Troubleshooter
Specified server information: 65.80.53.247:27910
RCON password provided? no
Run at Thu, 29 Nov 2007 20:29:28 +0000
TEST PROCESS
===================
> Checking if 65.80.53.247:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> No entries found on the server list
RECOMMENDATIONS
===================
* Your server may not even be running; try connecting to it on this computer: run /connect 127.0.0.1:27910 in console
* Your server's port may not be forwarded; make sure you forward your ports for UDP port 27910 (and make sure it's set to the right computer address)
* Your server's port may be firewalled; make sure you allow port 27910 through your firewall
-
did your forward port 27900 udp to your internal ip address?
-
Yeah, but it's because I have 2 routers. One wired connected to the wireless, and the wireless distributes internet through out my house using ethernet cables that are in the walls. Last time I tried this I connected my computer directly to the wired modem, forwarded the port and my server worked (just using the wired modem). So the port is forwarded on both modems. I can't connect my wired modem to my computer anymore, because the modem isn't no where near it. I have no clue why I can't this to work, but I can get Hamachi (a program that connects 2 or more people on a network so that they can play LAN games from anywhere in the world, which you need to forward a port for(if you didn't know about Hamachi))
Any suggestions on a way around this?
-
draw me a picture of your network
-
This was fun to draw in paint.
Reason I have 2 routers is because my wired router is my main router and is our service provider. The wireless is because it has 4-5 ethernet cable plugs to distribute the internet, while the wired has 1.
Easy Terms.
Wired = provider
Wireless = distributor
Makes it easier to think about.
-
ok,
Do you have access to change port forwarding in your wired router? If you do, you need to change the ip that 27900-27910 are point to to the ip address assigned to the wireless router.
THen assign the above ports in your wireless router to your pc.
-
Can't do it unless I have a laptop. I don't know where my father's is, so i'll wait for my brother over the weekend, but he has vista. Vista is ugly.
When I do forward ports for both it gets all screwy when it makes the switch from router to router, but we will see.
-
This is why people dont run reliable servers from their homes