Digital Paint Discussion Board
Paintball 2: The Game => Server Discussion => Topic started by: Lee on January 09, 2008, 01:12:27 PM
-
DP Resource Public Server Troubleshooter
Specified server information: 82.39.105.244:27910
RCON password provided? no
Run at Wed, 09 Jan 2008 18:11:11 +0000
TEST PROCESS
===================
> Checking if 82.39.105.244:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> No entries found on the server list
RECOMMENDATIONS
===================
* Your server may not even be running; try connecting to it on this computer: run /connect 127.0.0.1:27910 in console
* Your server's port may not be forwarded; make sure you forward your ports for UDP port 27910 (and make sure it's set to the right computer address)
* Your server's port may be firewalled; make sure you allow port 27910 through your firewall
-
1. what is your network setup?
2. is your router configured?
3. did you READ the server forum for possible answers?
-
the ports are opened, and it lets me connect to it
-
Well, they are either not open or you have a firewall in the way.
-
Definitely open
-
> Checking if 82.39.105.244:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> 1 entry/entries found in server list for your IP address:
> 82.39.105.244:27910
Well your server was up and the correct ip address is on teh server list.
-
so what shall i do?
-
and can u explain it bit more coz im noob:P
-
fire up your server and run the test again. I bet it works.
-
Thats the worst bet uve ever made;)
-
Will you try joining?
-
/me is @ work and doesnt play dp here.
-
ok, i just really wanna get it sorted
-
Let's make it really easy and make sure that you leave the black box open.
-
Hmmm?
-
"> Failed to connect to server!" ==> a port is not open or a firewall is blocking the port
-
i dont have i firewall and i opened the port :S
-
1. Is your server running right now
2. Is the command window open
3. If the command window is open, do you see a line that says sending heartbeat.
4. If you see the sending heartbeat line, do you see a line right after that that says acknowledged?
-
yes yes yes yes
-
> Checking if 82.39.105.244:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> Error: Read operation timed out, port is firewalled? data packet lost in transit?
> Failed to connect to server!
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> 1 entry/entries found in server list for your IP address:
> 82.39.105.244:27910
Now go to www.ipchicken.com and verify what your ip address is.
-
82.39.105.244
-
Post a screenshot of your console window and post the command line sued to launch the server.
-
sued?
-
used, sorry
-
http://i5.photobucket.com/albums/y177/pjjppj/Dpserver.jpg
http://i5.photobucket.com/albums/y177/pjjppj/doconsole.jpg
-
What command? Meh im noob
-
1. if you type heartbeat in teh server console do you get a response?
2. I want to see your startup config. ie.. paintball2.exe /set public 1 blah blah blah
-
yeah and i will get the rest now
-
paintball2.exe +set dedicated 1 +set public 1 +exec myserver.cfg +map midnight
-
post your server config and remove your login passwords
-
the full list?
-
// ----------------------------------------------------------------------
// GENERIC SERVER INFO
// ----------------------------------------------------------------------
set hostname "Heaton Manor"
set website "N/A" s
set admin "]spazz[@lee@" s
set e-mail "null@null.com" s
set location "Newcastle, England" s
set public 1 // set to 0 if you don't want this on the public server list
set password "********" // Password required to connect
setmaster dplogin.com master0.gamespy.com
// ----------------------------------------------------------------------
// MESSAGE OF THE DAY
// ----------------------------------------------------------------------
set motdfile pball/configs/motd.txt
// ----------------------------------------------------------------------
// ROTATION
// ----------------------------------------------------------------------
set rot_file pball/configs/rotation.txt
// ----------------------------------------------------------------------
// GENERAL SETTINGS
// ----------------------------------------------------------------------
set autojoin normal
set ffire 0
set grenadeffire 1
set timelimit 20
set fraglimit 50
set elim 30 // time (in seconds) before players respawn
set gren_explodeonimpact 1
set deadtalk 0 // set to 1 to allow dead players to talk to living
set sv_maxvelocity 4096
set swear_filter 0
set sv_votemapenabled 1
set idle 65 // time (in seconds) before idle players are put on observer
// ----------------------------------------------------------------------
// MATCH SETTINGS
// ----------------------------------------------------------------------
set allow_match 0 // set to 1 to enable the "match" command for clan matches
set matchmode_cfg "matchmode.cfg"
set publicmode_cfg "publicmode.cfg"
// ----------------------------------------------------------------------
// CONSOLE LOGGING
// ----------------------------------------------------------------------
//
// logfile
// -------
// 0 - Disable console logging.
// 1 - Buffered logging. File is wiped each server restart.
// 2 - Continuous logging. File is wiped each server restart.
// 3 - Continous logging. File is appended.
set logfile 3
// ----------------------------------------------------------------------
// STANDARD LOGGING
// ----------------------------------------------------------------------
// sl_logging
// ----------
// bit 1, val | 1 : display STDLogging to console
// bit 2, val | 2 : log STDLogging to sl_logfile
// bit 3, val | 4 : send UDP packets to server defined IPs (ENABLED)
// sl_logfile
// ----------
// the file to put the STDlog info in.
// # will be replaced with the PORT number of the server
// set sl_logging 2
// set sl_logfile server#.log
// ----------------------------------------------------------------------
// DOWNLOAD OPTIONS
// ----------------------------------------------------------------------
set allow_download 1
set allow_download_maps 1
set allow_download_models 1
set allow_download_sounds 1
set allow_download_players 1
// ----------------------------------------------------------------------
// OPERATOR SETTINGS
// ----------------------------------------------------------------------
// Use "login password" at the console to obtain op status of said level
// Commands are restricted by level in commands.cfg
set numpasses 5
set oppass1 ""
set oppass1level 1
set oppass2 ""
set oppass2level 50
set oppass3 ""
set oppass3level 100
set oppass4 ""
set oppass4level 150
set oppass5 "ITS A SeCRET:)"
set oppass5level 999
rcon_password ""
-
is that right?
-
Post a screenshot of your router port forwarding page.
-
how do i get that there is nothing to view router details
-
there is nothing on the router :S I have the disc theres no programs or anything
-
ooh got it
-
DONE IT :D thanks for all of your help
-
well i think i have
-
DP Resource Public Server Troubleshooter
Specified server information: 82.39.105.244:27910
RCON password provided? no
Run at Thu, 10 Jan 2008 17:36:59 +0000
TEST PROCESS
===================
> Checking if 82.39.105.244:27910 can be connected to...
> Writing to socket: '\xFF\xFF\xFF\xFFstatus\n'
> Attempting to read, 3 second timeout...
> OK: Strings 'Digital Paint' and/or 'DPPB2' found in server output (ping: 182ms)
> Using a non-default server hostname.
> Connection SUCCESSFUL! Port forwarding and firewall settings correct.
> Checking server list...
> Getting server list from http://dplogin.com/serverlist.php
> 1 entry/entries found in server list for your IP address:
> 82.39.105.244:27910
RECOMMENDATIONS
===================
* Everything looks like it should work
-
Right its on how do i get to show on server list on game
-
]SPAZZ[ arenaball 1 / 8 166 ms 82.39.105.244:27910 15:46:56
its there
-
my mates couldnt see it:S
-
they need to update their server list or get new glasses