Digital Paint Discussion Board
Paintball 2: The Game => Server Discussion => Topic started by: IronFist on December 26, 2005, 11:35:49 PM
-
Post removed
-
Whatever my router is. It's from SMC networks, I think.
Head on over to http://192.168.2.1
Put in the password. By default it's 'default'.
Go to setup->Virtual Server
Put in the last two digits of your computer's IP.
Set the private and public port to 27910
Set it to UDP.
All set!
-
Thanks, IronFist.
Another note: Sometimes you can specify the computer by its name rather than IP address, which is useful because with DHCP, you may not always end up with the same IP address.
-
Hey i have the sbg900 and i cant figure it out can some1 help me?
-
for the sbg900:
1. access the web interface as usual - i believe it to be 192.168.100.1
2. Login. The default login is:
User: admin
Pass: motorola
3. Click the "Gateway" button on the left hand side.
(http://www.portforward.com/english/routers/port_forwarding/Motorola/SBG900/SBG9002.jpg)
4. Click on the "Port Forwarding" tab at the top of the page.
(http://www.portforward.com/english/routers/port_forwarding/Motorola/SBG900/SBG9003.jpg)
5. Click on "config" at the top of the page.
(http://www.portforward.com/english/routers/port_forwarding/Motorola/SBG900/SBG9004.jpg)
6. Fill in these values:
Template: Custom
Name: PBall2
Port Start: 27910
Port End: 27910
LAN IP Address: 0 by default
You will obviously need your own LAN IP to tell the router where to send these people. Just go to Start > Run > "cmd" > "ipconfig" - this will list all adapters and their basic information , including IP address. Record your IP address, then you are prepared to connect to your router. If you've done it before, this is a piece of cake. If not, you should have at least cracked open the manual to have learned the default password and how to access it!
Enable: Yes
7. Click "Add" and "Apply"
-
Wow, I think I love that manual/readme thing. It tells the user that they did something wrong.
-
Here's netgear's guide. It might be useful for some people: http://kbserver.netgear.com/kb_web_files/N101145.asp
-
Hi, I have G8100, what I have to do?
-
I just stumbled on this website thanks to Digg, it will help in most future situations of people needing to know how to forward ports on specific router models:
http://www.portforward.com/default.htm
-
where do i find out where my trigger port is frequency and type?
-
trigger port frequency and type soz
-
27910 and UDP by default. Use the "Modify" button instead of making multiple posts, please.
-
ok, and also it still wont let me do it >:( ive got the right address and all stuff u told me but it still isnt going right. it says either you have not entered registration information or your registratoin information is invalid and i typed wut u sayed and i also typed the find button on address
-
Registration information? What are you trying to do? Where are you entering this at?
-
the port trigger download
-
Uh... just go to http://www.portforward.com/routers.htm then select the router you have, then select Quake2 (paintball2 uses the same port as quake2).
-
i got a NetGear WGT624 v3
Can any one help me with scren shots please
-
http://www.portforward.com/english/routers/port_forwarding/Netgear/WGT624v3/Quake_2.htm