Digital Paint Discussion Board
Paintball 2: The Game => Help and Support => Resolved Help & Support => Topic started by: Visine on September 27, 2006, 09:52:50 PM
-
Here, i did EVERYTHING I WAS SAPOSE TO DO and it doesnt work!!!
(http://img242.imageshack.us/img242/8082/myesrverjp3.png) (http://imageshack.us)
please help
-
#1.) Make sure your LAN ip is always 192.168.1.103 (you can bind it to your mac address on the router)
#2.) Make sure that you're running the server properly (didn't mess with the port)
#3.) Make sure there's no firewall or anything blocking dpball2 the app
#4.) Make sure that there's no router/vpn/hardware-firewall between your router and your modem
#5.) What's your ISP? Some get funky with this...
-
I can barely read your image, but open the ports for TCP, too.
-
Also, your own server probably won't show up for you, so get another person to test it. The most likely cause for the problem is a firewall, though.
-
K so, if it is a firewall, then what should i do
right now i have
Paintball2
port number 27910
enabled
so...
what should i do now, and i have forward ported everything
-
Paintball 2, port ANYTHING, ideally. It should work. If it doesn't, there's a firewall, or you're doing it wrong.
Open ports for UDP and TCP, just for fun. And make sure the port set in the server config is the same as the one you're forwarding.
-
Where do i change the port in the server config ?
i thinks thats what is goin on
-
Server.cfg. Also, make sure you're running a dedicated server.
-
where in the server.cfg do i cahnge port number?
-
C:\PAINTBALL2\pball\configs\server.cfg - add set port 27910 right under the set email option near the top of that config file. Use that port number or whatever port number you have given permissions to in your router configs.
EXAMPLE:
set hostname "GRaFFiTi PainT ={CLaSSiC 1}="
set website "COMING SOON" s
set admin "Snipen, Sharon, Derrek, PiCaSSo" s
set e-mail "graffiti-taggerz@hotmail.com" s
set port 27910
set location "Dallas, Texas" s
setmaster q2master.planetquake.com
-
intercourse!
it didnt work
i cant belive it still doesnt meddling work
... man
iv done eveyrthing!!
-
I had the same problem. You can still connect using iP address right?
Go to www.kissmyip.org then tell someone to try and connect to that IP.
If it's a match server you want, you're fine.
If it's a pub server you want, you're screwed.
*sorry about new topic, my computer screwed itself*
-
kissmyip.com doesn't work for me...must be down or my ISP is messing with me.
http://www.ipchicken.com/
Sooo much better...EAT THE CHICKEN!!!
-
is there any other port becides 27910? because mine dont work either here are the steps i did
1. On the desktop shortcut put in that string the lauches the server
2. Configure the myserver.cfg
3. Foward port 27910
4. lauch
5. I am able to join from my LAN but dont see it on the global list program in the games system folder neither my freiends dont see it either
plz help ..thx
-
5. I am able to join from my LAN but dont see it on the global list program in the games system folder neither my freiends dont see it either
plz help ..thx
make sure that your server is a public server and not a private one in the config file.
set sv_minclientbuild 14 // minimum version a client must have to connect
set public 1 // set to 0 if you don't want this on the public server list
set password "" // Password required to connect
-
He has public set, because his ip shows up on http://dpball.com/serverlist.php .
Actually, it shows up in the serverlist for me, and I can connect:
24.45.89.10:27910|<X*F> WARGROUNDS|47|ksplat3|0 / 75
-
Hm...that last line,
setmaster q2master.planetquake.com
What happens if that is not there? It wasn't in mine, could that be the problem? But if so why was it sending a heartbeat?
anyway I added the port line hopefully it helps.
-
The "setmaster" command is so it will show up on the old Quake2 master server lists. Programs like ASE, GameSpy, and HLSW use this.