Digital Paint Discussion Board
Paintball 2: The Game => Help and Support => Resolved Help & Support => Topic started by: Spark on May 28, 2007, 04:17:41 PM
-
i need to know how to find the ip address.. hurry pleas fast
-
my game ip address so people can get init
-
whatismyip.com :D
-
Here you go enjoy http://www.ipchicken.com
-
no you know like **.***.**.***:????? i don't know the last part.... how....
my ip address is 69.156.137.8 and there is someting at the end like 69.156.137.8:????
-
That's the port at the end. Should be 27910 by default, methinks.
-
u sure? anyways thx
-
u sure? anyways thx
Thats the default. However you can change it in your server config file.
-
However you can change it in your server config file.
I keep hearing this but I don't see where you change it at. Or do you have to write something into the config.
-
The cvar that controls the port is 'port'.
If you dont find it on the server sonfig it should be 27910.
-
I keep hearing this but I don't see where you change it at. Or do you have to write something into the config.
Add this to the end of your server.cfg file:
seta port "27910"
-
aint working the 27910
-
Alright, did you do what Zorchenhimer said? By the way, if you're friends are trying to connect remotely, I assume you've done the necessary port forwarding?
-
Alright, did you do what Zorchenhimer said? By the way, if you're friends are trying to connect remotely, I assume you've done the necessary port forwarding?
And if not: http://portforward.com/
-
Alright, did you do what Zorchenhimer said? By the way, if you're friends are trying to connect remotely, I assume you've done the necessary port forwarding?
And if not: http://portforward.com/
I was going to waaaaaaaiiiiiiiiiit until he said whether or not he did :P You're always there stealing my thunder :(
-
You're always there stealing my thunder :(
:D
-
omg i don;t get any of thiss.... i recently tryied to make a server and i followed all the instructions.. but in the end there was a section for firewall and stuff... my server didn't show up so i tried allowing port and stuff in but i have no clue how to do it.... can someone type in what i have to do... and portforward is so confusting... it doesn't even tell you how to do it.. it just says read this and that... so help me
-
and portforward is so confusting... it doesn't even tell you how to do it.. it just says read this and that... so help me
Why don't you 'read this and that' then come back for help once you've exhausted all possible resources on your end? Just a thought...
Edit: Sorry if that sounded trollish, I'm just saying that it sounds like there's your problem and that you have a solution i ya look into it. If you want, post your router and stuff on here and maybe we can walk ya through the port forwarding.
Cheers,
y00tz
-
hi in port forwading place i done the first step which is pick my router which is speedstream 6520....later it says pick a game ... but paintball 2 is not on it????
-
wut is the paintball port.. i am at the section where i have to choose or set the protocoll, ports and stuff at 192.168.2.1 bell
-
hi in port forwading place i done the first step which is pick my router which is speedstream 6520....later it says pick a game ... but paintball 2 is not on it????
Oh, follow the guide for Quake 2.
wut is the paintball port.. i am at the section where i have to choose or set the protocoll, ports and stuff at 192.168.2.1 bell
It is by default, 27910, but you can change it.
-
Form Input - Error
One or more of the requested ports is already allocated for system use.
i followed the thing and at the end it said this(on the top)
-
i don't know if i am done but wut do you do after the shortcut thing.. do i need to register my server?
-
Form Input - Error
One or more of the requested ports is already allocated for system use.
i followed the thing and at the end it said this(on the top)
For your port forwarding? Weird, maybe it was right all along.
i don't know if i am done but wut do you do after the shortcut thing.. do i need to register my server?
Nope, shouldn't. Make sure you have setmaster dplogin.com somewhere in the config file.
-
Nope, shouldn't. Make sure you have setmaster dplogin.com somewhere in the config file.
how do i setmaster dplogin.com?
-
Nope, shouldn't. Make sure you have setmaster dplogin.com somewhere in the config file.
how do i setmaster dplogin.com?
In your server configuration, make sure there is a line that reads:
setmaster dplogin.com, it'll probably be at the top, if it isn't there, add it.
Also, if you have this:
setmaster dplogin.com
setmaster q2master.planetquake.com
setmaster master0.gamespy.com
Someone correct me if I'm wrong, but it works better if it's:
setmaster dplogin.com q2master.planetquake.com master0.gamespy.com
Also Spark, have you read this? http://digitalpaint.planetquake.gamespy.com/docs/server_guide_win32.html
I hope so, it's a big help. Sorry for not asking about that earlier.
-
i finallly forwarded all my stuff... and have finsished all the step.. when i made a shorcut and added +set dedicated 1 +set public 1 +exec myserver.cfg +map midnight and opened the black screen popuped and it says..
49 CMDlist entrys found.
---pb2 initgame ---
autojoin on, normal
---rotation init---
6 maps added to rotation.
global login enabled
---server initialization----
mapname: airtime3
Bad field -> teams --2
---pb2 initmatch---
bad gametype, unsupported - 2 not in 4
--map loaded:airtime3--
---team flag ctf---
0 entities inhibited
0 teams with 0 entities
ACE: No node file found, creating new one...done.
wut do i do next?
-
you play on your server :)
Looks like it's setup up right, but we have to wait for it to 'heartbeat' the masterlist. You'll see it in the black box, it'll say something like pinging, then heartbeat.
If you want to know if your heartbeat made it to the server , you can either look for your IP on here: http://dplogin.com/serverlist.php, or tell us your server name and we'll tell you if we see it.
-
is it done? can people see it?
-
Oh, and if you remember before, you can go to: www.whatismyip.com to find your IP, THEN look for it on the list.
Cheers & good luck,
y00tz
-
http://dplogin.com/serverlist.php
-
thanks
-
69.156.139.201 thats my ip and its not on it.. omg its so complicated
-
I would say so, no matter what this forum is flooded with server problems
-
omg i forwarded everything and stuff.. and its not working... do i have to register my ip somewhere or something?
-
setmaster dplogin.com <---do you have this in your config?
-
yes
-
// ----------------------------------------------------------------------
// GENERIC SERVER INFO
// ----------------------------------------------------------------------
set hostname "Spark(VQ) server"
set website "http://www.____" s
set admin "Spark" s
set e-mail "Mvpspark@aim.com" s
set location "London, ON" s
set public 1 // set to 0 if you don't want this on the public server list
set password "" // Password required to connect
setmaster dplogin.com
setmaster q2master.planetquake.com
setmaster master0.gamespy.com
// ----------------------------------------------------------------------
// MESSAGE OF THE DAY
// ----------------------------------------------------------------------
set motdfile pball/configs/motd.txt
// ----------------------------------------------------------------------
// ROTATION
// ----------------------------------------------------------------------
set rot_file pball/configs/myrotation.txt
// ----------------------------------------------------------------------
// GENERAL SETTINGS
// ----------------------------------------------------------------------
set autojoin normal
set ffire 0
set grenadeffire 1
set timelimit 20
set fraglimit 50
set elim 60 // time (in seconds) before players respawn
set gren_explodeonimpact 1
set deadtalk 0 // set to 1 to allow dead players to talk to living
set sv_maxvelocity 4096
set swear_filter 0
set sv_votemapenabled 1
set idle 65 // time (in seconds) before idle players are put on observer
// ----------------------------------------------------------------------
// MATCH SETTINGS
// ----------------------------------------------------------------------
set allow_match 0 // set to 1 to enable the "match" command for clan matches
set matchmode_cfg "matchmode.cfg"
set publicmode_cfg "publicmode.cfg"
// ----------------------------------------------------------------------
// CONSOLE LOGGING
// ----------------------------------------------------------------------
//
// logfile
// -------
// 0 - Disable console logging.
// 1 - Buffered logging. File is wiped each server restart.
// 2 - Continuous logging. File is wiped each server restart.
// 3 - Continous logging. File is appended.
set logfile 3
// ----------------------------------------------------------------------
// STANDARD LOGGING
// ----------------------------------------------------------------------
// sl_logging
// ----------
// bit 1, val | 1 : display STDLogging to console
// bit 2, val | 2 : log STDLogging to sl_logfile
// bit 3, val | 4 : send UDP packets to server defined IPs (DISABLED)
// sl_logfile
// ----------
// the file to put the STDlog info in.
// # will be replaced with the PORT number of the server
// set sl_logging 2
// set sl_logfile server#.log
// ----------------------------------------------------------------------
// DOWNLOAD OPTIONS
// ----------------------------------------------------------------------
set allow_download 1
set allow_download_maps 1
set allow_download_models 1
set allow_download_sounds 1
set allow_download_players 1
// ----------------------------------------------------------------------
// OPERATOR SETTINGS
// ----------------------------------------------------------------------
// Use "login password" at the console to obtain op status of said level
// Commands are restricted by level in commands.cfg
set numpasses 5
set oppass1 "s"
set oppass1level 1
set oppass2 "p"
set oppass2level 50
set oppass3 "a"
set oppass3level 100
set oppass4 "r"
set oppass4level 150
set oppass5 "k"
set oppass5level 150
rcon_password ""
-
Also, if you have this:
setmaster dplogin.com
setmaster q2master.planetquake.com
setmaster master0.gamespy.com
Someone correct me if I'm wrong, but it works better if it's:
setmaster dplogin.com q2master.planetquake.com master0.gamespy.com
-
Okay, well since you got that error when you tried to do the port forwarding, let's do this.
Like on the first page, use the command to change your port
I believe it was
seta port xxxxx
change it to something else, like 27920
so
seta port 27920
then go through the port forward thing again, except this time use 27920, and try it again.
-y00tz
-
no i fixed the foward thing... and it is working know.. there is one list that says quake 2....
-
after the steps.. do i just leave it..or go and start a new game
-
Just leave the black DOS box alone. (Minimize it if you want to.) Then go into the game and find your server and you can play on it.
-
oh that helps alot.. after i opened it, i closed it, and went to find my server.. when it wasn't there i created a new game.. thx kilo
-
i think its working know... that helped alot.. alot.. i just have to ask a friend to go in and see if anyone is in it
-
***OFF TOPIC***
Spark please quit double and triple posting!!!
Just modify your posts.
-
oh one more question.. people can;t come in... how do i disable the password?
-
In the DOS box type password "".
Or type password to find it out and then while in the server type cvar_set password unset.
-
Spark(VQ) Server 69.156.139.201:27910
That's you man, it's working :P
Congratulations!
-y00tz
p.s. I'll probably play sometime on that server if you don't mind, I ping realllly good.
-
What does the (VQ) stand for?
-
thx... yah... whenever you need to borrow the server.. just aim me.. mvpspark@aim.com... thx VQ stands for Vanquish
-
another job well done Kilo, y00tz and jits
-
Holy so do I y00tz I got 37 ping only lower in gotmtdew and mine!!!!!!!!! Sick.