Author Topic: Server issue:fire rate  (Read 2431 times)

prozajik

  • Autococker
  • Posts: 761
Server issue:fire rate
« on: November 26, 2010, 02:24:38 PM »
Well  i had the issue with guns. Its fire rate is changing dynamically. During match cocker may shoot like VM and in the end of match it is shooting faster than automag :X
I have demonstrated it in this demo
http://www.banterous.co.uk/index.php?page=demo&id=681
The fire rate changes whole the demo so if you watch the full demo you will see
Can anyone help me solve this problem pls? It is bad because we have our own server and must use("block") the otb/icey/tarts server for matches.
PS:Sry idk the times when it changes but it is not so long
« Last Edit: November 26, 2010, 03:06:17 PM by prozajik »

T3RR0R15T

  • Map Committee
  • Autococker
  • Posts: 2593
Re: Server issue:fire rate
« Reply #1 on: November 27, 2010, 07:52:57 AM »
It is possible to change the setting g_autofire to 0, so that you will shot only one ball if you click once with your mouse. If you made that and you click in different speeds, you could have something like that.

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #2 on: November 27, 2010, 05:28:56 PM »
I didnt change anything. Anyway i was holding my mouse button not just pressing it again and again. I am not trying to fake that. I have the issue with server but idk what is the reason of that. After sometime it stops shooting at all and you have to change the map to be able to shoot again. I was thinking about some reasons:1)The ping of server. But i think this is not possible because the fire rate is changing dynamically. 2) Problem in the config. I dont think this is possible to because of dynamic changing again. I guess there are not so many things you can add to config so they will change randomly.
Also i tried to restart server several times but it helped just for a while and than it begun changing again.
If anyone knows at least a clue to solving this problem please let me know. I would be really happy if i could play there normal matches there.

Gamabunta

  • Committee Member
  • Autococker
  • Posts: 703
Re: Server issue:fire rate
« Reply #3 on: November 27, 2010, 06:40:59 PM »
We were playing castle1 on 93.185.103.38:9972 yesterday and all of sudden I noticed my gun would be shooting with higher ROF. I mentioned it and few rounds later others noticed it happened to them too. I told flyover, who was logged in, to change it back, but he claimed not to have played with any settings. I was told spartax had access to server, but he claims not to have changed anything too. I find it pretty strange for any setting to change dynamically, especially rate of fire - it's very unlikely that it just started to happen for no reason.

Post your server config, or better yet, change it back to default match server config. That's the only thing I have on mind right now.

STeam

  • VM-68
  • Posts: 121
Re: Server issue:fire rate
« Reply #4 on: November 28, 2010, 05:59:34 AM »
We were playing castle1 on 93.185.103.38:9972 yesterday and all of sudden I noticed my gun would be shooting with higher ROF. I mentioned it and few rounds later others noticed it happened to them too. I told flyover, who was logged in, to change it back, but he claimed not to have played with any settings. I was told spartax had access to server, but he claims not to have changed anything too. I find it pretty strange for any setting to change dynamically, especially rate of fire - it's very unlikely that it just started to happen for no reason.

Post your server config, or better yet, change it back to default match server config. That's the only thing I have on mind right now.

gama, i rly didnt do nothing, i just dont know "wtf" is this bug and i trying fix it long time, but idk how to change it back... if u rly think i change classic setting on this suck, u r stupid, sorry. I cant play cuz this bug( or wtf is that), so its worst for me ;)

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #5 on: November 28, 2010, 06:52:44 AM »
OK here is the config.
But as i said i didn't change anything during the time it went bad
PS:Can't upload .txt as attachement
// ----------------------------------------------------------------------
// GENERIC SERVER INFO
// ----------------------------------------------------------------------

set hostname ".3z' Match Server"
set website "http://www.____" s
set admin "selda,prozajik" s
set e-mail "prozajik@gmail.com" s
set location "Prague, Czech Republic" s

set public 1 // set to 0 if you don't want this on the public server list
set password "" // Password required to connect

setmaster dplogin.com master0.gamespy.com

// ----------------------------------------------------------------------
// MESSAGE OF THE DAY
// ----------------------------------------------------------------------

set motdfile pball/configs/motd.txt

// ----------------------------------------------------------------------
// ROTATION
// ----------------------------------------------------------------------

set rot_file pball/configs/rotation.txt

// ----------------------------------------------------------------------
// GENERAL SETTINGS
// ----------------------------------------------------------------------

set autojoin 0
set ffire 0
set grenadeffire 1
set timelimit 20
set fraglimit 50
set guntemp_inc 0
set elim 60 // time (in seconds) before players respawn
set gren_explodeonimpact 1
set deadtalk 0 // set to 1 to allow dead players to talk to living
set sv_maxvelocity 4096
set swear_filter 0
set sv_votemapenabled 0
set idle 65 // time (in seconds) before idle players are put on observer
set maxclients 16
set flagcapendsround 0
set floodprotect 0
set deadtalk 1
set grenadeffire 0
set observerblackout 1
set ball_speed "2790"


// ----------------------------------------------------------------------
// MATCH SETTINGS
// ----------------------------------------------------------------------

set allow_match 0 // set to 1 to enable the "match" command for clan matches
set matchmode_cfg "matchmode.cfg"
set publicmode_cfg "publicmode.cfg"

// ----------------------------------------------------------------------
// CONSOLE LOGGING
// ----------------------------------------------------------------------
//
// logfile
// -------
// 0 - Disable console logging.
// 1 - Buffered logging.  File is wiped each server restart.
// 2 - Continuous logging.  File is wiped each server restart.
// 3 - Continous logging.  File is appended.

set logfile 3

// ----------------------------------------------------------------------
// STANDARD LOGGING
// ----------------------------------------------------------------------

// sl_logging
// ----------
// bit 1, val | 1 : display STDLogging to console
// bit 2, val | 2 : log STDLogging to sl_logfile
// bit 3, val | 4 : send UDP packets to server defined IPs (DISABLED)

// sl_logfile
// ----------
// the file to put the STDlog info in.
// # will be replaced with the PORT number of the server

// set sl_logging 2
// set sl_logfile server#.log

// ----------------------------------------------------------------------
// DOWNLOAD OPTIONS
// ----------------------------------------------------------------------

set allow_download         1
set allow_download_maps    1
set allow_download_models  1
set allow_download_sounds  1
set allow_download_players 1
set allow_download_textures 1

// ----------------------------------------------------------------------
// OPERATOR SETTINGS
// ----------------------------------------------------------------------

// Use "login password" at the console to obtain op status of said level
// Commands are restricted by level in commands.cfg
set numpasses 5
set oppass1      ""
set oppass1level 1
set oppass2      ""
set oppass2level 50
set oppass3      ""
set oppass3level 100
set oppass4      ""
set oppass4level 150
set oppass5      ""
set oppass5level 300

rcon_password ""


Gamabunta

  • Committee Member
  • Autococker
  • Posts: 703
Re: Server issue:fire rate
« Reply #6 on: November 28, 2010, 03:07:20 PM »
You have:
set grenadeffire 1
and just a few lines later:
set grenadeffire 0
so remove first setting

Also: set gren_explodeonimpact 0 (impact nades are lame).

And remove: set ball_speed "2790", this is value from 3+ years ago, might not be working well with other settings. Hence your "bug", most probably.

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #7 on: November 29, 2010, 09:54:16 AM »
...
set grenadeffire 1
and just a few lines later:
set grenadeffire 0
...
Well i changed everything as you said and still no result :/
« Last Edit: November 29, 2010, 10:41:42 AM by prozajik »

Gamabunta

  • Committee Member
  • Autococker
  • Posts: 703
Re: Server issue:fire rate
« Reply #8 on: November 29, 2010, 02:00:20 PM »
Run server on default file server.cfg, if this doesn't help, try to run it from your computer (might be CPU or ram issues on server PC? kind of clueless here).

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #9 on: November 29, 2010, 03:27:21 PM »
Well this server(not mine PC it is PC made for hosting servers) also runs WOW servers but there is no problem in WOW. I will try default settings and see. Anyway thanks for your help

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #10 on: November 30, 2010, 02:26:56 AM »
Now it even stoped shooting lol :X. I tryed the default cocnfig but still nothing. I will talk to adminbecause it is probably problem of the host server.
Thanks for help i think that there is no way you can help me now.
Thanks again.

prozajik

  • Autococker
  • Posts: 761
Re: Server issue:fire rate
« Reply #11 on: December 01, 2010, 02:54:54 PM »
ok so i finally solved the problem. There were some bugs in host server it just needed to restart the server PC. Thanks for all help
Thread Closed