Author Topic: old thread needs deleted (Read 10602 times)

UDead · « **on:** March 21, 2008, 12:22:58 PM »

i get this error saying....

************ ERROR ************
MAX_PATCHES
        1 file(s) copied.
Press any key to continue . . .

what im doing is modifing the UB_Cliff map....and im trying to compile it in finall (high quality).....and thats when i got the error....now i dont get the error when i compile it in final....but it was a little slow at first.....

Garrett · « **Reply #1 on:** March 21, 2008, 12:35:07 PM »

Before you go decompiling another persons map, you should ask permission to do so. Its not a rule, it just makes you look more respectable.
Also, the search feature brought up an answer for your question.
http://digitalpaint.planetquake.gamespy.com/testwiki1/pb2wiki.php?word=Map+Compiling+Errors

UDead · « **Reply #2 on:** March 21, 2008, 12:39:41 PM »

hey...that map was in the public domain.....im not disagreing with u...but its also hard to contact someone to get permission....but really i dont have to get permission.....

Garrett · « **Reply #3 on:** March 21, 2008, 12:42:46 PM »

The maker is active on these forums. Where did you get the .map file if you didn't decompile?

UDead · « **Reply #4 on:** March 21, 2008, 12:46:07 PM »

what do u mean by decompile it.....??...

ill tell u where i got it form if u tell me what that means....

Garrett · « **Reply #5 on:** March 21, 2008, 12:48:10 PM »

Decompile means you run the bsp file through a program and it made a .map file.

UDead · « **Reply #6 on:** March 21, 2008, 12:56:44 PM »

ok.....i got that map form this website....

"ftp://www.otb-server.de/pub/Maps/map/"

UDead · « **Reply #7 on:** March 21, 2008, 01:06:05 PM »

so.....this website u gave me is not really descriptive.....

ViciouZ · « **Reply #8 on:** March 21, 2008, 01:25:07 PM »

There is too much area to lightmap at that quality. High quality compiles are barely distinguishable from final compiles anyway, so just final compile it.

UDead · « **Reply #9 on:** March 21, 2008, 01:34:17 PM »

what do i do if it starts to run slow in places

ViciouZ · « **Reply #10 on:** March 21, 2008, 01:36:52 PM »

Wait patiently for an hour or two.

UDead · « **Reply #11 on:** March 21, 2008, 01:38:59 PM »

so what would i do it this map gets out there and everyone plays it...this will have to wait an hour to start playing agian?

KnacK · « **Reply #12 on:** March 21, 2008, 01:41:14 PM »

omfg.....

I really can't believe all of those maps were given to OTB to post for download....

* KnacK waits for the wrath of WarWulf to come ....

Quote from: UDead on March 21, 2008, 12:56:44 PM

ok.....i got that map form this website....

"ftp://www.otb-server.de/pub/Maps/map/"

ViciouZ · « **Reply #13 on:** March 21, 2008, 01:54:25 PM »

Quote from: UDead on March 21, 2008, 01:38:59 PM

so what would i do it this map gets out there and everyone plays it...this will have to wait an hour to start playing agian?

I thought you meant in compiling.

If it's getting slow in-game, it probably means high R_speeds, which may mean that the map is leaked. Also, don't release it until warwulf agrees.

KnacK: DP and S8N released all their .map files in zips, plus krewzer releases his maps with source and so do a few others.

KnacK · « **Reply #14 on:** March 21, 2008, 01:58:40 PM »

okie dokie

I didn't know that.

UDead · « **Reply #15 on:** March 21, 2008, 02:01:14 PM »

so can u tell me how to fix it.....i know that theres no leakeds....but what is R_speed and what dose it do....is it the read speed??

UDead · « **Reply #16 on:** March 21, 2008, 02:02:38 PM »

could the map be slow...one becasue its big and i mod some things and that i guss im missing a file called colormap....?

UDead · « **Reply #17 on:** March 21, 2008, 02:11:22 PM »

Code: [Select]

Games\bsp\pball2\quake2\pball\mapfiles>call ..\compilers\qbsp ub_cliff#2

Games\bsp\pball2\quake2\pball\mapfiles>..\..\util\qbsp3 ub_cliff#2
----------- qbsp3 -----------
original code by id Software
Modified by Geoffrey DeWan
Revision 1.09
-----------------------------
gamedir set to Games\bsp\pball2\quake2\pball\
entering Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.map
Entity 0, Brush 144: mixed face contents
  Brush: Line 1364, file Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.ma
p
Entity 0, Brush 163: mixed face contents
  Brush: Line 1535, file Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.ma
p
Entity 0, Brush 233: mixed face contents
  Brush: Line 2165, file Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.ma
p
Entity 0, Brush 276: mixed face contents
  Brush: Line 2549, file Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.ma
p
0...1...2...3...4...5...6...7...8...9... (0)
0...1...2...3...4...5...6...7...8...9... (1)
writing Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.prt
Writing Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.bsp
    2 seconds elapsed

Games\bsp\pball2\quake2\pball\mapfiles>call ..\compilers\vis -fast ub_cliff#2


Games\bsp\pball2\quake2\pball\mapfiles>..\..\util\qvis3 -fast ub_cliff#2

----------- qvis3 -----------
original code by id Software
Modified by Geoffrey DeWan
Revision 1.03
-----------------------------
fastvis = true
reading Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.bsp
reading Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.prt
 479 portalclusters
1466 numportals
0...1...2...3...4...5...6...7...8...9... (5)
Average clusters visible: 416
Building PHS...
Average clusters hearable: 478
visdatasize:61176  compressed from 61312
writing Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.bsp
  5.0 seconds elapsed

Games\bsp\pball2\quake2\pball\mapfiles>call ..\compilers\rad -chopcurve 128 u
b_cliff#2
You should obtain the Arghrad 3.00 Test before lighting.
Unfortunately it can't be redistributed, so grab it here:
http://forums.gamedesign.net/viewtopic.php?t=49129
Then place arghrad.exe in bsp\quake2\util
and delete the echo's from bsp\quake2\pball\compilers\rad.bat
----------------------------------------------------------------


Games\bsp\pball2\quake2\pball\mapfiles>..\..\util\arghrad -gamedir bsp\pba
ll2\quake2\pball -chopcurve 128 ub_cliff#2
----- ArghRad 3.00T9 by Tim Wright (Argh!) -----
----- TESTING VERSION, DO NOT REDISTRIBUTE -----
Modified from original source code by id Software

----- Settings -----
 -gamedir set to bsp\pball2\quake2\pball\  (game pak dir)
 -chopcurve set to 128.0  (curve surface patch size)
----- Load BSP File -----
reading Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.bsp

"WARNING: Colormap not found - no colored texture lighting"

Couldn't load pball/lit2_2
Couldn't load pball/rock4_2
Couldn't load pball/lit2_5
Couldn't load pball/jailbars
Couldn't load pball/grassp1
Couldn't load pball/box_1
Couldn't load pball/grass1_8
Couldn't load pball/r_metal1
Couldn't load pball/b_metal1
Couldn't load pball/wizwood1_6
Couldn't load pball/r_brl2
Couldn't load pball/r_brt2
Couldn't load pball/clip
Couldn't load pball/w_brl3
Couldn't load pball/w_brt3
Couldn't load pball/b_brl2
Couldn't load pball/b_brt2
Couldn't load pball/hay_top
Couldn't load pball/ground1_6
Couldn't load pball/ncstone
----- Light World -----
0...1...2...3...4...5...6...7...8...9... (32)
0...1...2...3...4...5...6...7...8...9... (99)
0...1...2...3...4...5...6...7...8...9... (1)
----- Save BSP File -----
writing Games\bsp\pball2\quake2\pball\mapfiles\ub_cliff#2.bsp
----- Time -----
  135 seconds elapsed

Games\bsp\pball2\quake2\pball\mapfiles>call ..\compilers\runmap ub_cliff#2

Games\bsp\pball2\quake2\pball\mapfiles>copy ub_cliff#2.bsp games\paintball
2\pball\maps\inprogress
        1 file(s) copied.

Games\bsp\pball2\quake2\pball\mapfiles>c:

Games\bsp\pball2\quake2\pball\mapfiles>cd \games\paintball2

Games\Paintball2>pause
Press any key to continue . . .

Chef-Killer · « **Reply #18 on:** March 21, 2008, 02:15:48 PM »

You should install your BSP to C:\.

UDead · « **Reply #19 on:** March 21, 2008, 02:22:57 PM »

it is.....
i took the c drive part off