Author Topic: I forwarded ports but server wont work  (Read 3316 times)

Visine

  • PGP
  • Posts: 9
I forwarded ports but server wont work
« on: September 27, 2006, 07:52:50 PM »
Here, i did EVERYTHING I WAS SAPOSE TO DO  and it doesnt work!!!



please help
« Last Edit: August 18, 2015, 11:07:09 AM by webhead »

TinMan

  • Autococker
  • Posts: 1347
Re: I forward ported everything but server wont work
« Reply #1 on: September 27, 2006, 07:56:50 PM »
#1.) Make sure your LAN ip is always 192.168.1.103 (you can bind it to your mac address on the router)
#2.) Make sure that you're running the server properly (didn't mess with the port)
#3.) Make sure there's no firewall or anything blocking dpball2 the app
#4.) Make sure that there's no router/vpn/hardware-firewall between your router and your modem
#5.) What's your ISP? Some get funky with this...

Eiii

  • Autococker
  • Posts: 4595
Re: I forward ported everything but server wont work
« Reply #2 on: September 27, 2006, 08:16:51 PM »
I can barely read your image, but open the ports for TCP, too.

jitspoe

  • Administrator
  • Autococker
  • Posts: 18802
Re: I forward ported everything but server wont work
« Reply #3 on: September 27, 2006, 08:48:13 PM »
Also, your own server probably won't show up for you, so get another person to test it.  The most likely cause for the problem is a firewall, though.

Visine

  • PGP
  • Posts: 9
Re: I forward ported everything but server wont work
« Reply #4 on: September 28, 2006, 07:31:58 PM »
K so, if it is a firewall, then what should i do

right now i have

Paintball2
port number 27910

enabled

so...

what should i do now, and i have forward ported everything

Eiii

  • Autococker
  • Posts: 4595
Re: I forward ported everything but server wont work
« Reply #5 on: September 28, 2006, 08:11:36 PM »
Paintball 2, port ANYTHING, ideally. It should work. If it doesn't, there's a firewall, or you're doing it wrong.

Open ports for UDP and TCP, just for fun. And make sure the port set in the server config is the same as the one you're forwarding.

Visine

  • PGP
  • Posts: 9
Re: I forward ported everything but server wont work
« Reply #6 on: September 29, 2006, 07:33:54 AM »
Where do i change the port in the server config ?

i thinks thats what is goin on

Eiii

  • Autococker
  • Posts: 4595
Re: I forward ported everything but server wont work
« Reply #7 on: September 29, 2006, 08:12:43 AM »
Server.cfg. Also, make sure you're running a dedicated server.

Visine

  • PGP
  • Posts: 9
Re: I forward ported everything but server wont work
« Reply #8 on: September 29, 2006, 08:22:27 AM »
where in the server.cfg do i cahnge port number?

PiCaSSo

  • Autococker
  • Posts: 728
Re: I forward ported everything but server wont work
« Reply #9 on: September 29, 2006, 08:37:15 AM »
C:\PAINTBALL2\pball\configs\server.cfg - add set port 27910 right under the set email option near the top of that config file.  Use that port number or whatever port number you have given permissions to in your router configs.

EXAMPLE:

set hostname "GRaFFiTi PainT ={CLaSSiC 1}="
set website "COMING SOON" s
set admin "Snipen, Sharon, Derrek, PiCaSSo" s
set e-mail "graffiti-taggerz@hotmail.com" s
set port 27910
set location "Dallas, Texas" s
setmaster q2master.planetquake.com

Visine

  • PGP
  • Posts: 9
Re: I forward ported everything but server wont work
« Reply #10 on: September 30, 2006, 03:51:32 PM »
intercourse!

it didnt work

i cant belive it still doesnt meddling work

... man

iv done eveyrthing!!

ViciouZ

  • Map Committee
  • Autococker
  • Posts: 2227
Re: I forward ported everything but server wont work
« Reply #11 on: October 01, 2006, 01:55:09 AM »
I had the same problem. You can still connect using iP address right?

Go to www.kissmyip.org then tell someone to try and connect to that IP.

If it's a match server you want, you're fine.
If it's a pub server you want, you're screwed.

*sorry about new topic, my computer screwed itself*
« Last Edit: October 01, 2006, 02:33:13 AM by ViCiOUS »

TinMan

  • Autococker
  • Posts: 1347
Re: I forward ported everything but server wont work
« Reply #12 on: October 01, 2006, 02:07:38 AM »
kissmyip.com doesn't work for me...must be down or my ISP is messing with me.
http://www.ipchicken.com/
Sooo much better...EAT THE CHICKEN!!!

Security98

  • PGP
  • Posts: 1
Re: I forward ported everything but server wont work
« Reply #13 on: October 27, 2006, 09:24:59 PM »
is there any other port becides 27910?  because mine dont work either here are the steps i did

1.  On the desktop shortcut put in that string the lauches the server

2.  Configure the myserver.cfg

3.  Foward port 27910

4.  lauch

5.  I am able to join from my LAN but dont see it on the global list program in the games system folder neither my freiends dont see it either
plz help  ..thx

Zorchenhimer

  • Autococker
  • Posts: 2614
Re: I forward ported everything but server wont work
« Reply #14 on: October 28, 2006, 08:51:19 AM »
5.  I am able to join from my LAN but dont see it on the global list program in the games system folder neither my freiends dont see it either
plz help  ..thx

make sure that your server is a public server and not a private one in the config file.

set sv_minclientbuild 14 // minimum version a client must have to connect
set public 1 // set to 0 if you don't want this on the public server list
set password "" // Password required to connect

jitspoe

  • Administrator
  • Autococker
  • Posts: 18802
Re: I forward ported everything but server wont work
« Reply #15 on: October 30, 2006, 01:03:58 PM »
He has public set, because his ip shows up on http://dpball.com/serverlist.php .

Actually, it shows up in the serverlist for me, and I can connect:

24.45.89.10:27910|<X*F> WARGROUNDS|47|ksplat3|0 / 75

m7feettall

  • Autococker
  • Posts: 818
Re: I forward ported everything but server wont work
« Reply #16 on: October 31, 2006, 12:18:51 PM »
Hm...that last line,

setmaster q2master.planetquake.com

What happens if that is not there? It wasn't in mine, could that be the problem? But if so why was it sending a heartbeat?

anyway I added the port line hopefully it helps.

jitspoe

  • Administrator
  • Autococker
  • Posts: 18802
Re: I forward ported everything but server wont work
« Reply #17 on: October 31, 2006, 03:19:48 PM »
The "setmaster" command is so it will show up on the old Quake2 master server lists.  Programs like ASE, GameSpy, and HLSW use this.