Author Topic: Server help (Read 6711 times)

akonnyoungjesus · « **on:** January 10, 2006, 07:11:50 PM »

Yes I need help getting my server up, I have followed the tutorial and I can open the command box and go into digitalpaintball but my server doesn't show up... I do not have a firewall as I have deleted it for specific reasons, at the end of the tutorial it says make sure you have a Quake2 port (if you have a router) to 2910 or whatever the port was, so I thought that might be the problem so I googled some information and I went through another tutorial on how to change my router ports, so I did that and added the Quake21 port (as well as 22 because the guide said Quake needed it) So after that I thought for sure it would show up but to my surprise it did not, if anyone has had this problem or know how to fix it please help me.

jitspoe · « **Reply #1 on:** January 10, 2006, 07:14:27 PM »

Is the public cvar set to 1? In the server window, it should say something along the lines of:

Sending heartbeat to...
Success.

akonnyoungjesus · « **Reply #2 on:** January 10, 2006, 07:19:32 PM »

As a matter of fact I took a screen shot for you.

http://img235.imageshack.us/my.php?image=deleteme8iv.png

jitspoe · « **Reply #3 on:** January 10, 2006, 07:21:38 PM »

Ok, your ip shows up on http://dpball.com/serverlist.php -- at least, it's the same IP that shows up on the forums. It should be on the list unless there's a router and/or firewall blocking connections.

akonnyoungjesus · « **Reply #4 on:** January 10, 2006, 07:28:45 PM »

What should I do then?

akonnyoungjesus · « **Reply #5 on:** January 10, 2006, 07:31:46 PM »

And another screen shot of my firewall > virtual server stuff.

http://img472.imageshack.us/my.php?image=fmdsfmls5ap.jpg

jitspoe · « **Reply #6 on:** January 10, 2006, 08:24:34 PM »

The machine you're running the server on is 192.168.2.1?

lekky · « **Reply #7 on:** January 10, 2006, 08:27:45 PM »

i was gonna say check that, the other ports u have open are at 192.168.2.4

you need to make sure the ports are open on your firewall too

edit: just read about no firewall

Dragon Net · « **Reply #8 on:** January 11, 2006, 12:42:25 PM »

Quote from: akonnyoungjesus on January 10, 2006, 07:11:50 PM

Yes I need help getting my server up, I have followed the tutorial and I can open the command box and go into digitalpaintball but my server doesn't show up... I do not have a firewall as I have deleted it for specific reasons, at the end of the tutorial it says make sure you have a Quake2 port (if you have a router) to 2910 or whatever the port was, so I thought that might be the problem so I googled some information and I went through another tutorial on how to change my router ports, so I did that and added the Quake21 port (as well as 22 because the guide said Quake needed it) So after that I thought for sure it would show up but to my surprise it did not, if anyone has had this problem or know how to fix it please help me.

yea i have the same prob man

akonnyoungjesus · « **Reply #9 on:** January 11, 2006, 04:37:33 PM »

I switched them from .1 to .4 and it still doesn't work, what else should I try?

jitspoe · « **Reply #10 on:** January 11, 2006, 04:55:53 PM »

Do you know for certain that's actually the IP of the machine you're running the server on? If you've got a DHCP server, the IP's can change. If you're able to, referring to the machine by its name is usually more stable.

lekky · « **Reply #11 on:** January 11, 2006, 05:08:16 PM »

if you're on a network, find out the address of the machine you are running the server on.

start menu > Run > type "cmd" > press enter > in box type "ipconfig"

then see what it says is your ip address...should be 192.168.2."something"

whatever that "something" is use that number for the port unblocking

wasted · « **Reply #12 on:** January 12, 2006, 04:14:42 PM »

how i make a server

P!nk · « **Reply #13 on:** January 12, 2006, 05:32:53 PM »

Post removed

akonnyoungjesus · « **Reply #14 on:** January 14, 2006, 01:51:30 PM »

ok i got the server but its blacked out on the list

lekky · « **Reply #15 on:** January 14, 2006, 01:59:38 PM »

you usually see your own server as blacked out on htelsit, doesn't mean everyone else does too.

akonnyoungjesus · « **Reply #16 on:** January 14, 2006, 02:28:04 PM »

how do i find ips to ban people

also how do i password a server

M3YGG (PbDc) · « **Reply #17 on:** January 14, 2006, 02:35:52 PM »

there are two posts on this board, one called 'wall of shame - ips to ban' and the other 'ip to ban 2' i think

to ban an ip first login,

then in the console type

'addip <ip> <ip>' then hit enter
then type 'writeip'

this will create a file called listip.cfg in the pball folder, move this to the configs folder and in the server.cfg file type 'exec pball/configs/listip.cfg' i might be wrong

to password protect a server login then type in the console

'cvar_set password <password goes here>'

to remove a password type in the console

'cvar_set password unset'

hope that helps

akonnyoungjesus · « **Reply #18 on:** January 14, 2006, 02:57:34 PM »

after i do the stuff in the server file like put wot u said (btw do i use the ' or leave em out) wot after that

akonnyoungjesus · « **Reply #19 on:** January 14, 2006, 03:04:24 PM »

also, how do i take friendly fire and gun temp off

Author Topic: Server help (Read 6711 times)

wasted

M3YGG (PbDc)