Author Topic: Server Issues (Read 16024 times)

DooCi · « **Reply #60 on:** July 24, 2013, 12:31:34 PM »

My ipv4 address started with 10.10. ....., but on the port forwarding site it asked for 198.162.1._. Thats why im confusedd

SuperMAn · « **Reply #61 on:** July 24, 2013, 12:37:21 PM »

Did you select the right router? Or are you just looking at my picture and seeing the 192.168.1._? The picture is for a TrendNet router, it is just an example.

If you selected the right router and it still shows 192.168._._ just ignore it and pretend it says 10.10._._

DooCi · « **Reply #62 on:** July 24, 2013, 01:09:44 PM »

I selected the correct router and it still said 192.168.1._ .My ipv4 address is 10.10. .......
How am i supposed to ignore it?

SuperMAn · « **Reply #63 on:** July 24, 2013, 01:14:18 PM »

lol.... Pretend it says 10.10._._ ?.........

It isn't that hard..

DooCi · « **Reply #64 on:** July 24, 2013, 03:08:28 PM »

Now im even more confused...

SuperMAn · « **Reply #65 on:** July 24, 2013, 03:41:55 PM »

http://www.englishforeveryone.org/Topics/Reading-Comprehension.htm

Sorry but i'm not going to waste anymore time trying to explain this to you. This stuff only takes like 5 minutes to do. I will help over TeamViewer if you want. If not, good luck.

DooCi · « **Reply #66 on:** July 24, 2013, 03:52:56 PM »

Ok thanks, Im hoping my friend Lazers can help me out

LaZeRs · « **Reply #67 on:** July 24, 2013, 03:55:51 PM »

I will, don't worry.

DooCi · « **Reply #68 on:** July 24, 2013, 06:25:29 PM »

I hope...

CheMiCal · « **Reply #69 on:** July 24, 2013, 06:48:38 PM »

there are like 4 5 homerun servers already, u dont need one.

DooCi · « **Reply #70 on:** July 24, 2013, 09:02:12 PM »

Well, I wanna have my own server. I dont care what you think...

CheMiCal · « **Reply #71 on:** July 24, 2013, 09:26:48 PM »

then buy one, don't be a cheap bastard.

Cameron · « **Reply #72 on:** July 24, 2013, 10:37:38 PM »

Quote from: ShAwNtHeeKiLLeR on July 24, 2013, 12:31:34 PM

My ipv4 address started with 10.10. ....., but on the port forwarding site it asked for 198.162.1._. Thats why im confusedd

Guess its my turn now then...

Tell me EXACTLY what your IPv4 address is, like the whole thing, not shortened.

DooCi · « **Reply #73 on:** July 24, 2013, 11:17:15 PM »

10.10.0.2

Cameron · « **Reply #74 on:** July 24, 2013, 11:20:38 PM »

Quote from: ShAwNtHeeKiLLeR on July 24, 2013, 11:17:15 PM

10.10.0.2

Alright, so now in your web browser, write "10.10.0.1" and tell me what it comes up with.

DooCi · « **Reply #75 on:** July 24, 2013, 11:32:58 PM »

It took me to the username and password page!

Cameron · « **Reply #76 on:** July 24, 2013, 11:37:15 PM »

Good! Now, you need those.

Rick · « **Reply #77 on:** July 24, 2013, 11:37:25 PM »

Quote from: Rick on July 22, 2013, 11:32:38 PM

1. Open up your internet Browser.
2. Type in "192.168.1.1" in the address bar.
3. You should be prompted for the User and Password.
- Username is 'admin' by default.
- Password is 'password' by default.
4. Click OK.
5. You should now be on your router page.
6. Click the Port Forwarding / Port Triggering link near the left of the page.
7. Put a dot into the Port Forwarding radio button.
8. Click the Add Custom Service button near the bottom of the page.
9. Should be on a page with Service Name, Service Type etc.
10. Enter the following:
- Service Name = 'Paintball2'
- Service Type = 'TCP/UDP'
- Starting Port = '27910'
- Ending Port = '27910'
- Server IP Address = ~~'192.168.1'~~
10. Apply.
11. Done.

Here is a link to your router page, and how to do what I have said.

Hope this helps!

LaZeRs · « **Reply #78 on:** July 24, 2013, 11:44:21 PM »

Cameron:1
Rick: 0

Rick · « **Reply #79 on:** July 24, 2013, 11:46:22 PM »

Quote from: LaZerS on July 24, 2013, 11:44:21 PM

Cameron:1
Rick: 0

Would've helped if he had of told me he also had a modem

Plus, Cameron is my multiple account, sssh.